• 您正在使用的“商城基礎版”已到期,網站的付費功能即將被關閉。請盡快續費。
  • 俄文版為 商城基礎版 功能,3天后(2024-01-26 00:04)將自動關閉俄文版。
高壓水霧化制備粉末材料生產線氣霧化制備粉末材料生產線真空熔煉氣霧化制備粉末材料生產線旋轉盤離心霧化制備粉末材料生產線等離子體霧化制備粉末材料生產線急冷法非晶粉末材料生產線(中日合作)等離子體球化制備粉末材料生產線氮氣保護氣動分級超細粉末材料系統電極感應熔煉氣霧化制備粉末材料生產線燃氣火焰球化制備粉末材料生產線真空熔煉霧化造粒裝備噴霧沉積成形裝備粉末材料生產裝備推桿式脫氧還原設備鋼帶式脫氧還原設備網帶式脫氧還原設備管式回轉煅燒設備井式水蒸汽熱處理設備臥式真空脫脂設備氫化脫氫生產鈦粉末裝備粉末材料熱處理裝備真空脫脂燒結一體裝備高比重(PM/MIM)臥式真空燒結裝備高溫鉬鎢絲燒結裝備全自動推桿式燒結裝備網帶式燒結裝備高真空大型真空燒結裝備燃氣快速脫蠟/氣淬網帶式燒結裝備真空高溫感應燒結裝備CIM陶瓷燒結裝備連續式真空/氣氛熱加工設備壓力燒結爐粉末制品燒結裝備真空釬焊爐高溫連續石墨化生產設備真空定向凝固爐真空回火/退火爐真空感應熔煉爐雙室真空油淬氣冷爐CIM陶瓷脫脂裝備熱處理裝備真空(非真空)熔煉氣霧化制備粉末材料生產線等離子體球化制備粉末材料生產線等離子體霧化制備粉末材料生產線超細/納米多元復合正極材料及球形硅粉末負極材料生產技術解決方案鋼帶式材料煅燒合成設備推板式材料煅燒合成設備管式回轉煅燒設備正極材料生產設備技術方案應用領域石墨烯制備創新材料生產技術專業解決方案先進零部件產品生產解決方案儲能電池解決方案智能裝備和新材料技術測試和展示中心安裝培訓售后技術支持配件供應服務與支持關于我們專家顧問團企業文化資質榮譽組織機構廠房廠貌聯系我們人才招聘?技術解決方案之推桿式還原爐進出料現場視頻技術解決方案之推桿進出料現場視頻技術解決方案之推桿進出料現場視頻久泰科技出口日本水霧化制備粉末材料生產線視頻出口歐洲解決方案案例視頻資料下載內部管理平臺
案例詳情 / Case Details
高比重(PM/MIM)臥式真空燒結裝備
編號: JTZKS
技術方案簡介: 久泰科技生產的本系列高比重合金(PM/MIM)臥式真空燒結裝備主要用于高比重合金的燒結。 主要功能:真空內燒,分壓燒結、通氫燒結、通氮燒結、真空降溫、自然降溫、充氣冷卻、強制冷卻等。
產品詳情

高比重合金(PM/MIM)臥式真空燒結裝備


設備用途及原理

  本系列高比重合金(PM/MIM)臥式真空燒結裝備主要用于高比重合金的燒結。

  主要功能:真空內燒,分壓燒結、通氫燒結、通氮燒結、真空降溫、自然降溫、充氣冷卻、強制冷卻等。


Overview and Principles

This series of high-proportion alloy (PM/MIM) horizontal vacuum sintering equipment, produced by is primarily applied for sintering of high-proportion alloy.

 Its major functions: vacuum inside sintering, partial-pressure sintering, hydrogen sintering, vacuum cooling, natural cooling, charge cooling, and forced cooling etc.


設備優勢及特點 Advantages and Features

  一、創新技術優勢

        1、燒結技術新標準;

        2、多項行業首創的全新功能及工藝;

        3、替代傳統鉬絲推桿式燒結爐,燒結產品質量更高。


A. Innovative Technology Advantage

       1. New standard on sintering technology;

       2. Multi-field originally brand-new function and process;

       3. Substitution for conventional tungsten-wire pusher type sintering furnace, generating higher-quality sintering products.


二、智能控制系統優勢

  1、采用10-15寸人機界面,集中輸入數據、集中管理、集中控制;

  2、全自動運行(壓力,流量,點火等全自動調節);

  3、實時報警,歷史報警記錄;

  4、報警后自動判斷處理,分級等待;

  5、溫度、流量、速率、壓力、工藝整體輸入;

  6、實時趨勢曲線、歷史趨勢曲線;

  7、操作權限:操作者、管理者等(密碼保護);

  8、多段工藝曲線選擇;

  9、可升級遠程協助診斷功能系統。


B. Intelligent Control Technical Advantages

 1. Adopt the best human-machine interface, 10-15 inch, among German brands, centralized date input, centralized management, and centralized control;

 2. Completely auto-operation (completely auto-regulating, such as boating time, pressure, flow, ignition);

 3. Real-time alarm, historical alarm recording;

4. Auto-deciding handling methods after alarming, waiting with grades;

5. Integrated input of temperature, flow, pressure, and boating time;

6. Real-time tendency curves and historical tendency curves;

7. Operating authorization: operator, manager etc. (password protected);

8. Multi-stage technological curve options;

 9. Upgradable remote assisting-diagnosing system


三、整裝系統設計優勢,占地面積小

  1、采用立體化設計,將加熱變壓器立于爐體上方,冷卻水與爐體,泵組管道整體化設計,使占地面積縮小了30%,可選擇兩種擺放形式;

  2、設備整機采用烤漆。


C. Overall Designing Advantages, occupying small area

 1. Adopt 3D designing, placing heating pressure transformer above furnace, integrated designing of cooling water and furnace, pumping unit pipes, narrowing the occupied area with 30%, and two placing types available;

 2. The entire equipment is painted by baking varnish.


四、工藝精準控制技術優勢

  1、采用質量流量控制器及比例閥控制器,根據工藝參數自動流量調節,避免了轉子流量計及開閉式控制器因壓力波動等參數的變化導致進氣量的不穩定(20-50%波動率);

  2、每種工藝氣體各有兩個報警輸出(警告報警、動作報警);

  3、精細化氣體流動控制,氣體能夠均勻的流過產品。


D. Process Accurate Controlling Technology Advantages

 1. Adopt mass-and-flow controller and proportional valve controller, auto-regulating flow depending on process parameters, preventing the unstableness (20-50% fluctuating rate) of gas input volume caused by rotary flowmeter and open-close type controller due to the variation of parameters like pressure fluctuation.

 2. Each process gas has two alarm output (warning alarm and action alarm);

 3. Refined gas flowing control, and gas can evenly permeate into products.


五、生產效能大幅提升

 1、生產能力單爐最大1.5噸;

 2、創新型保溫隔熱技術,節省電能50%以上;

 3、氣體節省30%以上;

 4、單爐燒結產品合格率≥99%。


E. Production Efficiency Greatly Increased

 1. Production max output of singe furnace approximates 1.5 ton.

 2. Innovative holding insulation technology, saving more than 50% electricity consumption.

 3. Save more than 30% gas consuming.

 4. Single-furnace product qualification ratio≥99%.


六、設備控制優化,快速強制冷卻

 1、后門內置熱交換器;

 2、風機變頻器無極控制;

 3、根據工藝曲線降溫(速率可控制);

 4、提高生產效率。


F. Equipment Control Optimized, Fast Forced Cooling

1. Rear-door internal heat exchanger;

2. Fan frequency converter stepless controlling;

3. Cooling down according to process curves (speed is adjustable);

4. Increase production efficiency.


七、安全優勢

  1、大規格防爆裝置;

  2、自動泄壓裝置;

  3、反充壓裝置。


G. Security Advantage

 1. Huge-scale explosion-proof equipment;

 2. Pressure auto-relief device;

 3. Back-pressure filling device.


八、整機性能升級優勢

  1、爐內多點溫度檢測(美國熱電偶);

  2、冷卻水流量自動檢測控制;

  3、干式螺桿真空泵(德國萊寶/同級);

  4、閥門采用德國、日本品牌;

  5、人機界面采用德國最優品牌。


H. Integrated performance upgrading advantages

 1. Multi-point temperature testing inside furnace (American thermocouple);

 2. Auto-examining and controlling on cooling water flow/temperature;

 3.Dry-style screw vacuum pump (German Leybold/same class);

 4. Valves applies German and Japanese brands;

 5. Human-machine interface adopts the best brand in Germany.


設備主要技術參數Principle Technical Parameters

  以下是設備產品技術參數,部分數據會隨著產品創新改進,最新數據請聯系我們:

Product technical parameters of equipment are presented as below, and partial of these data will be updated as the product innovation, please contact us if any latest data:

以上為標準配置,可根據客戶要求進行調整。

It is standard configuration above, and can be adjusted according to the demand from customers.

全站搜索